Initials
1 Decal
$7.00
Skip to product information
Not sure? Check compatibility →
Initials
$7.00
CHECK YOUR CLEAT SURFACE
WORKS BEST ON
Smooth synthetic, coated, leather-like or molded panels.
AVOID
Knit, mesh, deep texture and highly flexible areas.
1. CHOOSE YOUR PACK
PERSONALIZE
Approx. 0.44 × 0.236 in (11.2 × 6 mm) for two letters.
BUY MORE, SAVE MORE
Made to order · Processing: 2–3 business days · International shipping available · Free U.S. shipping $20+
Add your initials in a bold, compact format made for smooth, compatible footwear surfaces.
Approximate tested size: 0.44 × 0.236 in (11.2 × 6.0 mm) for a two-letter example. Width varies by characters while height stays approximately 0.236 in (6 mm).
Processing: Made to order and ships within 5–7 business days.
Guarantee: 30-day durability guarantee when properly applied to a clean, smooth, compatible surface.
READ BEFORE APPLYING
HOW TO APPLY
Take your time. A clean surface, firm pressure, and a slow peel give the decal the best transfer.
CHOOSE THE RIGHT AREA
Apply to a smooth, clean, relatively flat surface. Avoid mesh, knit, deep texture, sharp ridges, and highly flexible areas.
CLEAN & FULLY DRY
Remove dirt first, then clean away oils and residue. Make sure the application area is completely dry before continuing.
PRESS BEFORE PEELING
With the decal still between the clear transfer film and backing, firmly rub across the entire design for several seconds.
PEEL THE BACKING SLOWLY
Peel the backing away slowly at a low angle. If any part stays behind, stop, lay the film back down, press that area again, and continue slowly.
POSITION & PRESS
Carefully place the decal, then press firmly across the full design from the center outward. Avoid repositioning once the adhesive touches the shoe.
REMOVE THE CLEAR FILM
Rub the design firmly once more, then peel the clear transfer film back slowly at a low angle. If an edge lifts, lay the film back down and press again.